Faucet Manual


Find the cartridge or toilet part you need, and how to replace it

Answer three or four questions about the handle or the tank and you get the part number, how to confirm it once the trim is off, and a step-by-step guide. Covers Moen and Delta single-handle showers, Moen sink faucets, aerators and toilet tank parts.

Shower and faucet cartridges

Moen and Delta cartridges that look alike often do not interchange. Each guide shows how to tell them apart, the replacement steps, and the limit stop and thermometer check that every shower cartridge swap ends with.

Shower and faucet guides
Part numberGuideFits
Moen 1222Posi-Temp shower cartridgeMoen showers whose handle only rotates
Moen 1225 / 1200Single-handle cartridgeMoentrol and Standard showers, one-handle sinks
Delta RP46074MultiChoice 13/14 cartridgeDelta showers made after March 2006
Delta RP19804Monitor 1300/1400 cartridgeDelta showers made before March 2006
M24x1 / M22x1Faucet aeratorKitchen and bathroom spouts

Toilet tank parts

A running toilet usually needs one of these parts. Lift the lid to see which kind you have: a hinged flapper (2-inch or 3-inch), a Kohler canister, an American Standard Champion valve, or the fill valve if water spills into the overflow pipe.

Toilet tank guides
Part numberGuideFits
Fluidmaster 400A / 400HFill valveMost two-piece tanks, 9 to 14 in tall
Fluidmaster 502 / Korky 100BP2-inch flapperDrain opening about 2.5 in
Fluidmaster 5403 / Korky 3060BP3-inch flapperDrain opening about 3.5 in
Kohler GP1059291Canister sealKohler single-flush canister toilets
7301111-0070AChampion 4 seal kitAmerican Standard 4-inch valves
Toilet tank cross-section showing a 2-inch flapper on the flush valve seat, the overflow pipe, and the lift chain to the tank leverwater linedrain opening: 2.5 in hole = 2 in flapper1234chain: about 1/2 in slack
Cutaway of a two-piece toilet tankSimple drawing, not to scale

Common problems

Every guide starts with turning off the water

Each procedure begins by closing the stop valve for that fixture and ends with a leak check, plus a thermometer check on showers. Each one also lists the signs that mean you should stop and call a licensed plumber: a stop valve that will not close, corroded supply lines, water at the base of the toilet, or anything inside the wall.

Gas appliances, water heaters, valve bodies, soldering and main shutoff replacement are not covered. What the site covers and why.

Don't see your faucet or toilet?
Send the brand, the model if you can find it, and a photo of the handle or tank.

Request a model